The project consisted of multiple building with both horizontal and vertical assemblies. The SolLine Solar Zee was used in a 6000mm span capacity which is quite unique. The system was designed around a bullnose section that was capable of the span. The system was secured by tension wires fro the roof line down to ground level. Each panel was interlinked with an aluminium tube detail.

The panel connections have interfaced with several details of which all are polished 316L stainless Steel. This was to allow a clean line Detail to the wire assemblies.

The tension wire was installed to angles as required with interface details to suit with machined clevis forks. The aluminium tube as well as visual enhancement provides additional structural stability to the system.

The installation are on all elevations to each building apart from where the SolLine Stellar 400 is installed.

The SolLine Stellar 400 is a perforated aerofoil system that is spanning 4000mm. The screen is installed over a 12000mm height and is motorised on a 5 position system. The assembly is connected to both Lux and Wind sensors for optimal control. The full system is connected to the Building Management System to ensure maximum protection from Solar Gain.

An encoder has been installed to the screen to ensure the Solar Blade assemblies return to Zero Plain when not in use.

4 screens have been installed across the complex on both east
and west elevations.

The Lunar 300 Aerofoil has been used on the office complex to provide both privacy and security to the car parks basement. The aerofoils differ in spanning requirements to a maximum of 5500mm. In addition to the car parks the stair wells have also been screened with the use of mitred corners and integrated door details.

The heights of the systems differ from a few hundred mm to over 5000mm as the assemblies follow the ground fall over the length of the structure.

Product: SolLine Solar Zee

Rafter: Water Jet Profile

First Fix: LouvreSol Flitch

Finish: PPC RAL 7037